JBFS Engineering Systems Private Limited

JBFS Scaffolding system is used to create temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man-made structures. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to safely. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.

JBFS Engineering Systems manufacture Scaffolding system with all its accessories using advanced automatic machines.

JBFS Scaffolding Systems include:

·       A base jack or plate which is a load-bearing base for the scaffold.

·       The standard, the upright component with connector joins.

·       The ledger, a horizontal brace.

·       The transom, a horizontal cross-section load-bearing component which holds the batten, board, or decking unit.

·       Brace diagonal and/or cross section bracing component.

·       Batten or board decking component used to make the working platform.

·       Coupler, a fitting used to join components together.

·       Scaffold tie, used to tie in the scaffold to structures.

·       Brackets, used to extend the width of working platforms.

Additional Information:

• Production Capacity: 2000 pieces / week
• Delivery Time: 3 - 5 days

JBFS Scaffolding system is used to create temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man-made structures. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to safely. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.

JBFS Engineering Systems manufacture Scaffolding system with all its accessories using advanced automatic machines.

JBFS Scaffolding Systems include:

·       A base jack or plate which is a load-bearing base for the scaffold.

·       The standard, the upright component with connector joins.

·       The ledger, a horizontal brace.

·       The transom, a horizontal cross-section load-bearing component which holds the batten, board, or decking unit.

·       Brace diagonal and/or cross section bracing component.

·       Batten or board decking component used to make the working platform.

·       Coupler, a fitting used to join components together.

·       Scaffold tie, used to tie in the scaffold to structures.

·       Brackets, used to extend the width of working platforms.

Additional Information:

• Production Capacity: 2000 pieces / week
• Delivery Time: Immediate

JBFS Engineering Systems manufactures Steel Girders as the means of supporting its bridge deck. The two most common types of modern steel girder bridges are plate and box. The term "girder" is often used interchangeably with "beam" in reference to bridge design. In a beam or girder bridge, the beams themselves are the primary support for the deck, and are responsible for transferring the load down to the foundation.

A plate girder is fabricated by welding plates together to create the desired shape. JBFS Engineering Systems receives large plates of steel in the desired thickness, then cuts the flanges and web from the plate in the desired length and shape. Plate girders can have a greater height than rolled beam girders and are not limited to standardized shapes.

Our manufacturing facilities are equipped with specific, fully automated CNC machines, which enable a clear and concise construction with preconfigured structural elements using advanced software. We use the latest 3-D Modelling software available to collaborate and create fabrication drawings to ensure that bridge builders have the information necessary to install girders with ease. The process focuses on long-lasting, reliable and low maintenance steel structures, which are dependable and unyielding.

Additional Information:

• Production Capacity: 100 tons / week
• Delivery Time: Immediate

JBFS Wall Form Shuttering are multi purpose product used to temporary support fresh concrete as a mould, in which concrete is poured and cast walls of any length or columns of any sizes and gaining initial strength, hardened and matured. These Products are one of the core elements which are used for supporting building construction slabs, canopies, beams, lintels for RCC construction work.

Shuttering is used in different shapes and sizes according to your construction elements in the form of PCC, RCC works in Building, Bridge, Tunnel Lining, Hydropower Dam, Irrigation Headwork, Sanitary Pipeline work, etc.

Shuttering is removed when concrete has reached a suitable strength and doesn’t further support. That process of removal of formwork is also called stripping. After stripping of form it’s components are removed and can be used in other construction processes or other parts of work. Using MS Shuttering is always recommended as it proves to be economical because of its constant re-usability and low maintenance due Steel properties. Further, finishing treatment requirement is less because it gives excellent exposed concrete surfaces as steel has no ability to absorb water concrete and hence, there are negligible chances of formation of the honey-combed surface.

JBFS Wall Form Shuttering are manufactured using high quality raw materials of thickness above 2.0 mm thick and angles size of 35/40/45/50 x 5 mm thickness.

JBFS Adjustable Base Plate which is a load-bearing base for the scaffold is used to create temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man-made structures. 

JBFS Engineering Systems manufacture Scaffolding system with all its accessories using advanced automatic machines.

Height: 500 mm 

Additional Information:

• Production Capacity: 2000 pieces / week
• Delivery Time: Immediate

JBFS Wall Form Shuttering are multi purpose product used to temporary support fresh concrete as a mould, in which concrete is poured and cast walls of any length or columns of any sizes and gaining initial strength, hardened and matured. These Products are one of the core elements which are used for supporting building construction slabs, canopies, beams, lintels for RCC construction work.

Shuttering is used in different shapes and sizes according to your construction elements in the form of PCC, RCC works in Building, Bridge, Tunnel Lining, Hydropower Dam, Irrigation Headwork, Sanitary Pipeline work, etc.

Shuttering is removed when concrete has reached a suitable strength and doesn’t further support. That process of removal of formwork is also called stripping. After stripping of form it’s components are removed and can be used in other construction processes or other parts of work. Using MS Shuttering is always recommended as it proves to be economical because of its constant re-usability and low maintenance due Steel properties. Further, finishing treatment requirement is less because it gives excellent exposed concrete surfaces as steel has no ability to absorb water concrete and hence, there are negligible chances of formation of the honey-combed surface.

JBFS Wall Form Shuttering are manufactured using high quality raw materials of thickness above 2.0 mm thick and angles size of 35/40/45/50 x 5 mm thickness.

Additional Information:

• Production Capacity: 2000 pieces / week
• Delivery Time: Immediate

JBFS Wall Form Shuttering are multi purpose product used to temporary support fresh concrete as a mould, in which concrete is poured and cast walls of any length or columns of any sizes and gaining initial strength, hardened and matured. These Products are one of the core elements which are used for supporting building construction slabs, canopies, beams, lintels for RCC construction work.

Shuttering is used in different shapes and sizes according to your construction elements in the form of PCC, RCC works in Building, Bridge, Tunnel Lining, Hydropower Dam, Irrigation Headwork, Sanitary Pipeline work, etc.

Shuttering is removed when concrete has reached a suitable strength and doesn’t further support. That process of removal of formwork is also called stripping. After stripping of form it’s components are removed and can be used in other construction processes or other parts of work. Using MS Shuttering is always recommended as it proves to be economical because of its constant re-usability and low maintenance due Steel properties. Further, finishing treatment requirement is less because it gives excellent exposed concrete surfaces as steel has no ability to absorb water concrete and hence, there are negligible chances of formation of the honey-combed surface.

JBFS Wall Form Shuttering are manufactured using high quality raw materials of thickness above 2.0 mm thick and angles size of 35/40/45/50 x 5 mm thickness.

Additional Information:

• Production Capacity: 2000 pieces / week
• Delivery Time: Immediate

JBFS Wall Form Shuttering are multi purpose product used to temporary support fresh concrete as a mould, in which concrete is poured and cast walls of any length or columns of any sizes and gaining initial strength, hardened and matured. These Products are one of the core elements which are used for supporting building construction slabs, canopies, beams, lintels for RCC construction work.

Shuttering is used in different shapes and sizes according to your construction elements in the form of PCC, RCC works in Building, Bridge, Tunnel Lining, Hydropower Dam, Irrigation Headwork, Sanitary Pipeline work, etc.

Shuttering is removed when concrete has reached a suitable strength and doesn’t further support. That process of removal of formwork is also called stripping. After stripping of form it’s components are removed and can be used in other construction processes or other parts of work. Using MS Shuttering is always recommended as it proves to be economical because of its constant re-usability and low maintenance due Steel properties. Further, finishing treatment requirement is less because it gives excellent exposed concrete surfaces as steel has no ability to absorb water concrete and hence, there are negligible chances of formation of the honey-combed surface.

JBFS Wall Form Shuttering are manufactured using high quality raw materials of thickness above 2.0 mm thick and angles size of 35/40/45/50 x 5 mm thickness.

JBFS Scaffolding system is used to create temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man-made structures. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to safely. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.

JBFS Engineering Systems manufacture Scaffolding system with all its accessories using advanced automatic machines.

JBFS Scaffolding Systems include:

·       A base jack or plate which is a load-bearing base for the scaffold.

·       The standard, the upright component with connector joins.

·       The ledger, a horizontal brace.

·       The transom, a horizontal cross-section load-bearing component which holds the batten, board, or decking unit.

·       Brace diagonal and/or cross section bracing component.

·       Batten or board decking component used to make the working platform.

·       Coupler, a fitting used to join components together.

·       Scaffold tie, used to tie in the scaffold to structures.

·       Brackets, used to extend the width of working platforms.

Additional Information:

• Production Capacity: 2000 pieces / week
• Delivery Time: Immediate

JBFS Scaffolding system is used to create temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man-made structures. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to safely. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.

JBFS Engineering Systems manufacture Scaffolding system with all its accessories using advanced automatic machines.

JBFS Scaffolding Systems include:

·       A base jack or plate which is a load-bearing base for the scaffold.

·       The standard, the upright component with connector joins.

·       The ledger, a horizontal brace.

·       The transom, a horizontal cross-section load-bearing component which holds the batten, board, or decking unit.

·       Brace diagonal and/or cross section bracing component.

·       Batten or board decking component used to make the working platform.

·       Coupler, a fitting used to join components together.

·       Scaffold tie, used to tie in the scaffold to structures.

·       Brackets, used to extend the width of working platforms.

Additional Information:

• Production Capacity: 2000 pieces / Week
• Delivery Time: Immediate

JBFS Scaffolding system is used to create temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man-made structures. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to safely. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.

JBFS Engineering Systems manufacture Scaffolding system with all its accessories using advanced automatic machines.

JBFS Scaffolding Systems include:

·       A base jack or plate which is a load-bearing base for the scaffold.

·       The standard, the upright component with connector joins.

·       The ledger, a horizontal brace.

·       The transom, a horizontal cross-section load-bearing component which holds the batten, board, or decking unit.

·       Brace diagonal and/or cross section bracing component.

·       Batten or board decking component used to make the working platform.

·       Coupler, a fitting used to join components together.

·       Scaffold tie, used to tie in the scaffold to structures.

·       Brackets, used to extend the width of working platforms.

Additional Information:

• Production Capacity: 1000 MT
• Delivery Time: Ready Stock

JBFS Scaffolding system is used to create temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man-made structures. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to safely. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.

JBFS Engineering Systems manufacture Scaffolding system with all its accessories using advanced automatic machines.

JBFS Scaffolding Systems include:

·       A base jack or plate which is a load-bearing base for the scaffold.

·       The standard, the upright component with connector joins.

·       The ledger, a horizontal brace.

·       The transom, a horizontal cross-section load-bearing component which holds the batten, board, or decking unit.

·       Brace diagonal and/or cross section bracing component.

·       Batten or board decking component used to make the working platform.

·       Coupler, a fitting used to join components together.

·       Scaffold tie, used to tie in the scaffold to structures.

·       Brackets, used to extend the width of working platforms.

Additional Information:

• Production Capacity: 1000 pieces / week
• Delivery Time: Immediate

JBFS Scaffolding system is used to create temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man-made structures. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to safely. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.

JBFS Engineering Systems manufacture Scaffolding system with all its accessories using advanced automatic machines.

JBFS Scaffolding Systems include:

·       A base jack or plate which is a load-bearing base for the scaffold.

·       The standard, the upright component with connector joins.

·       The ledger, a horizontal brace.

·       The transom, a horizontal cross-section load-bearing component which holds the batten, board, or decking unit.

·       Brace diagonal and/or cross section bracing component.

·       Batten or board decking component used to make the working platform.

·       Coupler, a fitting used to join components together.

·       Scaffold tie, used to tie in the scaffold to structures.

·       Brackets, used to extend the width of working platforms.

Specialized components used to aid in their use as a temporary structure often include heavy duty load bearing transoms, ladders or stairway units for the ingress and egress at construction project.

JBFS Adjustable Props are used to create temporary structures for shoring and supporting floor while laying concrete slabs or in applications wherever need of adjustable perpendicular load bearing. These play the role of telescoping centering systems in construction sites. JBFS Adjustable Props are made of steel tubes that can be easily adjusted to heights as per requirement.

These Prop made from 50 NB (60.3mm OD) M. S. Round 'B' class Pipe as outer and 40 NB (48.3mm OD) M.S. Round 'B' class Pipe as inner, which slides in & out for adjusting the height as required with support of malleable cast iron nut and bottom is M.S. Base Plate of size 150*150*6mm manufactured using the advanced CNC CO2 arc welding technology.

For top we offer as per the requirement prop head available in L type, Tilt-up (V Type) Head, U Head and Standard Flat Type and painted with ‘Dipped’ using oxford enamel deep blue color.

Additional Information:

• Production Capacity: 2000 pieces / week
• Delivery Time: Immediate